The last step of any guitar setup applies only to electric guitars with adjustable pickups. That is to adjust the pickup heights so the volumes will be consistent. Where to Move the Pickups on a Guitar This is attained by moving the pickups either closer to or away...
After you’ve finished the guitar setup process, there are a few other things you can do to make sure your guitar is functioning properly. One is to clean out the potentiometers and the output jack. First, remove the electronics control cavity backplate or pick...
Now that the truss rod is adjusted, the string action at the bridge is adjusted, and nut slots are dialed in, you can now do the last step of the setup, which is to adjust intonation. Tuning fretted instruments Fretted instruments have equal temperament by design, and...
The best way to get accurate readings when setting intonation is to use a good-quality strobe tuner. This is because strobe tuners act as a magnifying glass when tuning a guitar. If you break down the interval in between two notes into 100 separate intervals, called...
After adjusting the truss rod and setting the string saddle heights at the bridge, you can now make the third adjustment, which is to the nut slots. There are three aspects of the nut slots that you will be addressing in the setup process in order to make sure...
